Corvus provides 2 5VDC power supply rails. Both are overcurrent protected, voltage and temperature is monitored. Depending on necessary current consumption and ambient temperature a heatsink must be installed. When using near the current limits (above 4A total), forced airflow is recommended.
For both 5V power rails:
- 7 – 50 VDC input
- 5.23 VDC output (+- 2%) @25°C , Ripple below 50mV @ 1.5A
- JST-GH 6p connector
- temperature and voltage monitored
- overcurrent protected
- seperate input protection fuses for both rails, dual power input
Although both rails can be switched ON/OFF, both 5V rails preserve their ON/OFF state without intervention from Corvus!